VGTU talpykla > Fundamentinių mokslų fakultetas / Faculty of Fundamental Sciences > Moksliniai straipsniai / Research articles >

Lietuvių   English
Please use this identifier to cite or link to this item: http://dspace.vgtu.lt/handle/1/3716

Title: Multifrequency piezoelectric energy harvester based on polygon-shaped cantilever array
Authors: Mažeika, Dalius
Čeponis, Andrius
Yang, Ying
Keywords: Energy harvester
Piezoelectric transducer
Cantilever array
Issue Date: 2018
Publisher: Hindawi
Citation: Mažeika, D.; Čeponis, A.; Yang, Y. 2018. Multifrequency piezoelectric energy harvester based on polygon-shaped cantilever array, Shock and vibration 2018: 1–11
Series/Report no.: 2018;
Abstract: This paper focuses on numerical and experimental investigations of a novel design piezoelectric energy harvester. Investigated harvester is based on polygon-shaped cantilever array and employs multifrequency operating principle. It consists of eight cantilevers with irregular design of cross-sectional area. Cantilevers are connected to each other by specific angle to form polygon-shaped structure. Moreover, seven seismic masses with additional lever arms are added in order to create additional rotation moment. Numerical investigation showed that piezoelectric polygon-shaped energy harvester has five natural frequencies in the frequency range from 10 Hz to 240 Hz, where the first and the second bending modes of the cantilevers are dominating. Maximum output voltage density and energy density equal to 50.03 mV/mm3 and 604 μJ/mm3, respectively, were obtained during numerical simulation. Prototype of piezoelectric harvester was made and experimental investigation was performed. Experimental measurements of the electrical characteristics showed that maximum output voltage density, energy density, and output power are 37.5 mV/mm3, 815.16 μJ/mm3, and 65.24 μW, respectively.
URI: http://dspace.vgtu.lt/handle/1/3716
ISSN: 1070-9622
Appears in Collections:Moksliniai straipsniai / Research articles

Files in This Item:

File Description SizeFormat
Multifrequency piezoelectric energy harvester based on polygon-shaped cantilever array.pdf6.08 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback