VGTU talpykla > Elektronikos fakultetas / Faculty of Electronics > Moksliniai straipsniai / Research articles >

Lietuvių   English
Please use this identifier to cite or link to this item:

Title: Structure of All-Digital Frequency Synthesiser for IoT and IoV Applications
Authors: Jurgo, Marijan
Navickas, Romualdas
Keywords: CMOS
integrated circuit
frequency synthesiser
time to digital converter
digitally controlled oscillator
Issue Date: 2019
Publisher: MDPI
Citation: Jurgo, M.; Navickas, R. Structure of All-Digital Frequency Synthesiser for IoT and IoV Applications. Electronics 2019, 8, 29.
Series/Report no.: 8;1
Abstract: In recent years number of Internet of Things (IoT) services and devices is growing and Internet of Vehicles (IoV) technologies are emerging. Multiband transceiver with high performance frequency synthesisers should be used to support a multitude of existing and developing wireless standards. In this paper noise sources of an all-digital frequency synthesiser are discussed through s-domain model of frequency synthesisers, and the impact of noise induced by main blocks of synthesisers to the overall phase noise of frequency synthesisers is analysed. Requirements for time to digital converter (TDC), digitally controlled oscillator (DCO) and digital filter suitable for all-digital frequency synthesiser for IoT and IoV applications are defined. The structure of frequency synthesisers, which allows us to meet defined requirements, is presented. Its main parts are 2D Vernier TDC based on gated ring oscillators, which can achieve resolution close to 1 ps; multi core LC-tank DCO, whose tuning range is 4.3–5.4 GHz when two cores are used and phase noise is −116.4 dBc/Hz at 1 MHz offset from 5.44 GHz carrier; digital filter made of proportional and integral gain stages and additional infinite impulse response filter stages. Such a structure allows us to achieve a synthesiser’s in-band phase noise lower than −100 dBc/Hz, out-of-band phase noise equal to −134.0 dBc/Hz and allows us to set a synthesiser to type-I or type-II and change its order from first to sixth.
Description: This article belongs to the Special Issue Intelligent and Cooperation Communication and Networking Technologies for IoT
ISSN: 2079-9292
Appears in Collections:Moksliniai straipsniai / Research articles

Files in This Item:

File Description SizeFormat
Structure of All-Digital Frequency Synthesiser for IoT and IoV Applications.pdf3.17 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.


Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback